OSV-STAR / Scan'O'Vision STAR camera
Version 2.0
3434.505.02
Page 7
2.5
Lens mounting
After removing the protective caps of the
camera and the lens, to insert the lens in the
Nikon mount (to put the dot of colour of the
lens in front of the dot of the ring [1]) and to
turn the lens counter clockwise until you hear
the click of the lock (about 1/6 turn) [2].
Before fixing the lens on the camera, always set the minimum
aperture (biggest number possible) and only change it with the
software remote control (the ring does not move).
Press the clutch button (point
14
of chapter
1.1.1
) during the
mounting of the lens.
Never touch the glass of the camera or lenses with your fingers.
If a hood is delivered with the lens you should always use it.
2.6
Removing the lens
Before the dismounting the camera, it is necessary to remove the lens.
To do this, hold the lens in the left hand; with a finger of your right
hand, push on the unlocking latch
[1]
(see point 12 of chapter
1.1.1
)
and turn the lens clockwise
[2]
until it is free (about 1/6 turn).
With
and
cameras, a plastic tool is delivered to
help the push on the unlocking latch when big lenses are used.
Press the clutch button (point
14
of chapter
1.1.1
) during the
removal of the lens. If the clutch button can not be fully
pressed, do not force; it is generally sufficient to give one or
two command of focus in the software OSV-STAR (camera
setting mode) to unblock the mechanism
In order to protect the camera and the lens, please immediately put back the protective caps of the
camera and the lens.
1
2
