SWISS PLUS RT100V8BT, Manual

Page: 37 / 37

37
Note: be careful not to discharge the battery by leaving the V8BT showing the message:
This is the only case where the V8BT does not turn off automatically! To return to the
menu, press the In / Out button.
Operating problems:
1 / When switching on the V8BT displays the message and turns off
immediately.
- the battery is almost discharged. You need to charge it.
2/ When switching on the reader the screen stays black:
- either the battery is totally discharged: leave it to charge.
- or the V8BT is no longer working. In this case an extended press on the In/Out button
will shutdown the reader with two "beeps". Send the reader back to After Sales.
3/ A message, whether or not intelligible remains displayed. Pressing buttons has no effect. The
program has "frozen"…
In this case you need to disconnect the battery
very carefully, without pulling on the wires ,
and wait a few seconds before re-connecting it.
4/ The V8BT will not switch on, even after charging: return to our After Sales service.
Very important: this reader has the latest technology in terms of power supply. The
Lithium/ion batteries should only be recharged using an USB power supply. Be careful to
never short circuit the battery.
Low battery
Questions? Contact your nearest SwissPlus ID distributor or visit;
www.swissplusid.com