background image

30 

System « WOOSIT » 

Writing the animal owner’s telephone number(s) in the ISO tag 

Our  wish  to  constantly  innovate  and  improve  our  products  has  led  us  to  offer  vets  the  option  of 
personalizing the tag, if they wish, before implanting it in the animal. 
The main technological advance offered by this V8BT reader is that it will allow reading and display of 
data  which  can  be  entered  by  the  vet  in  the  majority  of  the  “tags”  currently  marketed  worldwide, 
provided that they comply with the ISO standard. 

Realtrace has developed a system called “WOOSIT

®

” which is comprised of:

-

A reader /programmer    the PetSCAN RT150

 (1)

 which enables the vet to write additional

information to the “chip” before injecting it into the animal

(2)

.

-

The PetSCAN V8BT which now offers the possibility to read and display the ID number but also

to display additional data recorded by the vet in the memory as the phone number of the owner. 
Due to the low memory capacity available in ISO chips (used up until then) the “WOOSIT”  system is 
limited to the recording of one or two telephone numbers of 16 digits each . The vet and/or the owner 
of the animal may choose these numbers.

 

This system is totally compliant with the ISO 11784/85 standard of 1996 in addition to the new 14223 
standard* (May 2011) concerning the recording of data in advanced transponders.

 

It protects the asepsis of the chip, as the writing of the data is carried out via the cap which protects 
the needle.

 

If the owner prefers this, after the recording of one or two telephone numbers, the memory area used 
for this record can be blocked, making it impossible to delete or subsequently modify this information.

 

With the “WOOSIT” system, finding the owner of an animal will be particularly easy as reading the 
“chip” with the V8BT  will provide the phone  number(s) of the  administrator of the  database  and/or 
the owner of the pet.

 

Naturally,  any  pet  owner  who  does  not  wish  to  use  this  service  can  simply  enter  nothing  in  the 
memory area of the chip, as is currently the case.

 

.

    ID number and phones numbers   

       

Iso Chip 11784/85 compatible with the possibility to write aditionals data 

(FDXB+)

 

(1)Patented

(2)Sous  réserve  que  les  blocks  3/9/10/11/12/13  (EM4305)  ou  9/10/11/12/13/14/15  (EM  4569)  ne  soient  pas

verrouillés par le fournisseur de la « puce ». 

*

L'ISO  14223-1:2011  spécifie  l'interface  hertzienne  entre  l'émetteur-récepteur  et  le  transpondeur  évolué  utilisé

pour  l'identification  des  animaux  par  radiofréquence,  à  compatibilité  ascendante  totale  avec  les  spécifications 

données dans l'ISO 11784 et l'ISO 11785.

   

Summary of Contents for RT100V8BT






































Reviews: