Swisher ZT15542 Owner'S Manual Download Page 32

Each mower has its own model number.  Each 
engine has its own model number.  The model 
number for the mower will be found under the 
seat.  The model number for the engine will be 
found on the top of the blower fan housing.
All mower parts listed herein may be ordered 
directly from Swisher or your nearest Swisher 
dealer.
All engine parts may be ordered from the 
nearest dealer of the engine supplied with your 
mower. 

WHEN ORDERING PARTS, PLEASE HAVE THE

FOLLOWING INORMATION AVAILABLE:

Date Purchased ____________________

Purchased From____________________

PRODUCT – ZT18542A/ZT15542

SERIAL NUMBER -  _______________

MODEL NUMBER -  _______________

ENGINE MODEL NUMBER -  _______________

TYPE -  _______________

PART NUMBER WITH PAINT CODE__________________

*PART DESCRIPTION______________________________

www.swisherinc.com

TELEPHONE - 1-800-222-8183
FAX - 1-660-747-8650

SWISHER

1602 CORPORATE DRIVE
WARRENSBURG,  MO 64093

Mower Identification

Use only Swisher replacement parts.  
The replacement of any part on this 
unit with anything other than Swisher 
authorized replacement part may 
adversely affect the performance, 
durability and safety of this unit and 
may void the warranty.  Swisher 
disclaims liability for any claims or 
damages, whether warranty, property 
damage, personal injury or death 
arising out of the use of unauthorized 
replacement parts.

Unauthorized Replacement Parts

[email protected]

32

32

Summary of Contents for ZT15542





































Reviews: