CUSTOMER RESPONSIBILITIES/SPECIFICATIONS
V-Belts
Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. Replace belts if
they begin to slip from wear. SEE SPECIFICATION for belt part numbers and SERVICE section of this manual for
instructions on how to replace the belt.
Engine
REFER TO YOUR ENGINE OWNERS MANUAL
Overall Unit Care
Reduce the risk of fire by removing grass, leaves, and other debris that may have accumulated on the
machine. Allow the machine time to cool before cleaning or putting it in storage.
Wash mower periodically. Clean above and below deck.
Keep all electrical connections clean and tight.
Driving and Transport on Public Roads
Check applicable road traffic regulations before driving and transporting on public roads.
If the machine is transported, you should always use approved fastening equipment and ensure that the
machine is well anchored.
The cutting deck should also be lowered to the lowest position and the parking brake engaged.
GASOLINE CAPACITY
AND TYPE
SINGLE 1.1 GAL TANK
UNLEADED REGULAR
OIL TYPE (SPI-SF-SJ):
SEE ENGINE MANUAL
SPARK PLUG
SEE ENGINE MANUAL
GROUND SPEED
0 – 6 mph
TIRE SIZE
FRONT: 4.10” x 3 ½ -4 ¾ Bearing
REAR: 18 x 6.50 - 8
TIRE PRESSURE
FRONT: 50 psi Max
REAR: 22 psi Max
BATTERY
12V / Heavy Duty 275 CCA
Type U1L
HYDRO Bolt Torque
27 + - 3 ft. lbs
BLADE BOLT TORQUE
35 ft. lbs
CUTTING HEIGHT
1.5” – 5”
CUTTING WIDTH
42” – 2 Flat Blade System
PARKING BRAKE
Spring Assisted
FRONT AXLE
Rigid
SEAT
10” High Back Adjustable
TRANSMISSION
Commercial Grade Eaton Hydrostatic
DECK LIFT
Spring Assisted
UNIT MEASUREMENTS
LENGTH: 66”
WIDTH: 42”
Including Deck
WEIGHT: 525 lbs
11
11
SPECIFICATIONS