background image

LIMITED WARRANTY

The manufacturer’s warranty to the original consumer purchaser is: This product is free from defects in
materials and workmanship for a period of two (2) years from the date of purchase by the original
consumer purchaser. We will repair or replace, at our discretion, parts found to be defective due to
materials or workmanship. This warranty is subject to the following limitations and exclusions:

1)

Engine Warranty

All engines utilized on our products have a separate warranty extended to
them by the individual engine manufacturer. Any engine service difficulty is
the responsibility of the engine manufacturer and in no way is Swisher
Mower Co., Inc. or its agents responsible for the engine warranty. The
Briggs & Stratton Engine Service Hot-Line is 1-800-233-3723. The
Tecumseh Engine Service Hot-Line is 1-800-558-5402.

2)

Commercial Use

The warranty period for any product used for commercial or rental is limited
to ninety (90) days from the date of original purchase.

3)

Limitations

This warranty applies only to products which have been properly assembled,
adjusted, and operated in accordance with the instructions contained within
this manual. This warranty does not apply to any product of Swisher Mower
Co., Inc., that has been subject to alteration, misuse, abuse, improper
assembly or installation, shipping damage, or to normal wear of the product.

4)

Exclusions

Excluded from this warranty are normal wear, normal adjustments, and
normal maintenance. The pump, valve and cylinder each carry separate
manufacture’s warranties. The valve and cylinder both carry a one (1) year
limited warranty. The pump carries a two (2) year limited warranty.

In the event you have a claim under this warranty, you must return the product to an authorized service
dealer. All transportation charges, damage, or loss incurred during transportation of parts submitted for
replacement or repair under this warranty shall be borne by the purchaser. Should you have any questions
concerning this warranty, please contact us toll-free at 1-800-222-8183. The model number, serial number,
date of purchase, and the name of the authorized Swisher dealer from whom you purchased the mower will
be needed before any warranty claim can be processed.

THIS WARRANTY DOES NOT APPLY TO ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
AND ANY IMPLIED WARRANTIES ARE LIMITED TO THE SAME TIME PERIODS STATED
HEREIN FOR ALL EXPRESSED WARRANTIES.

Some states do not allow the limitation of

consequential damages or limitations on how long an implied warranty may last, so the above limitations
or exclusions may not apply to you. This warranty gives you specific legal rights and you may have other
rights, which vary from state-to-state. This is a limited warranty as defined by the Magnuson-Moss Act of
1975.

Please fill out the serial numbers and model numbers for both the engine and the log splitter on the back

page of this manual.

2

Summary of Contents for Logger LS67526S













Reviews: