Fig.10
P
A
H1
H2
O
10a. Taking care not to move the
enclosure, use the pre-drilled holes in
the wall profiles (A) as a template and
mark the hole positions on the wall with
a pencil. See
Fig.10.
10b. Remove the enclosure and drill the
holes with a drill bit suitable for the wall
type and fixing being used. Insert the
wall plugs (P) into the holes using a
rubber m allet.
10c. Apply silicone sealant to the back
of the wall profiles (A) and secure them
to the wall using screws ST4x30mm (O)
and screw cap washers (H1). Cover
them with screw cap (H2) as per
Fig.10.
Fig.11
11a.
Whilst supporting the frame,
carefully insert one corner of the
enclosure over one of the wall profiles
(A) and push it fully home.
11b. Carefully lift the other bottom corner
and fit it over the other wall profile (A).
See
Fig.11.
8
Corner Entry Shower Enclosure
Assembly Instructions
Watersmith UK Ltd.,BA22 8RT.
