Fig.16
H1
L
H2
I1
I1
17. Fit the left and right wall profile caps
(I1) to the top of both side profiles. See
Fig.17.
16a. Position the enclosure so that
there is an even gap to the edge of
the tray, and use a spirit level to
ensure the side profiles are vertical.
16b. Taking care not to move the
enclosure, use a 3mm HSS drill to drill
holes through the pilot holes on the
side profiles of the fixed glass (C).
Ensure that you do not drill too far and
mark the outer surface of the profiles.
16c. Secure the profiles using screws
ST4x12mm (L) and screw cap
washers (H1). Cover with screw caps
(H2) as per
Fig.16
.
11
Fig.17
Corner Entry Shower Enclosure
Assembly Instructions
Watersmith UK Ltd.,BA22 8RT.
