A
A
9a. Place the shower enclosure on the
shower tray, and position it so that there
is an even gap of not less than 10-15mm
to the edge of the tray.
9b. Adjust the two wall profiles so that
they sit flush to the walls, and use a spirit
level to ensure that they are both vertical.
See
Fig.9
.
8. Insert the two wall profiles (A) into
both side profiles, ensuring the correct
orientation of the flanges as per
Fig.8.
7
Fig.8
Fig.9
Corner Entry Shower Enclosure
Assembly Instructions
Watersmith UK Ltd.,BA22 8RT.
