22
Section 4
Setting up the Scorpio and test-flying
Adjusting the speed system and
trimmers
Use of a reflex profile means that the
Scorpio has special features which must be
taken into consideration when using the
speed system and the trimmers.
The Scorpio has a high basic trim speed
even with neutral trimmer position, and this
can be increased considerably by using the
additional speed system and the trimmers.
This gives the pilot a wide speed range, with
which to make the ideal adjustment to cruise
speed.
When using a reflex glider, flying at
maximum and minimum speed should only
be done with sufficient altitude and
experience.
Correct use of the speed system and
trimmers is very important with reflex
profiles. Therefore, study closely the
comments with Figs. 6a – 6e, which show
the various settings and positions.
Closed trimmers (Fig. 6a)
Because of the Scorpio’s high trim speed,
we recommend selecting the setting with
closed trimmers for launch and landing (the
D-riser is shortened by 30 mm). This setting
is also suitable for flying in thermals
because of the reduced sink rate.
Fig. 6a:
Closed trimmers