12
Twister Tube Assembly Instructions
FIGURE 14
1-1/2" bolt
2" x 4" x 8-1/4"
2" x 4" x 11-1/2"
2" x 4" x 18"
2" x 4" x 18"
2-1/2" screws
2-1/2" screws
washer
loc nuts
2" x 4" x 8-1/4"
FIGURE 16
FIGURE15
1-1/2" lag bolts
support bracket
Fig. 7
Fig. 7a
Fig. 7b
G. SUPPORT AND BRACKET
ASSEMBLY
1.
Assemble the support base as shown in
(FIG. 7)
.
2.
Attach the support bracket to the support base using
two 1-1/2" lag bolts
(FIG. 7a)
.
NOTE:
Pre-drill 1/8" pilot holes.
3.
Place the support beneath the slide base and determine
its final position.
NOTE:
Slide support should fit tightly
beneath the slide to assure proper support. Remove
corresponding nut and bolt, attach support to the slide
as indicated in
(FIG. 7b)
. Re-attach hardware.
4.
Level grade at the bottom of the slide.
