Entrance
Section
Exit Section
Run-Off
Section
3/4'' Hex Head Bolt
5/16'' Washer
5/16'' Washer
Loc Nut
Note:
One hole of
exit section should
be exposed.
Note:
Two holes should be
on the right side of the seam
formed by pieces 1 & 2 of
Section A.
E. SLIDE ASSEMBLY
1.
Attach the Run-Off Section to the Exit Section as shown in
(Fig. 5)
using (6) 3/4'' Hex Head Bolts, (12) 5/16'' Washers and
(6) Loc- Nuts.
2.
Connect the Exit Section to the Entrance Section as shown in
(Fig. 5)
.
3.
Secure the Entrance Section and the Exit Section using (12) 3/4'' Hex Head Bolts, (24) 5/16'' Washers and (12) Loc Nuts.
4.
Tighten all hardware completely.
Fig. 5a
Fig. 5
Twister Tube Assembly Instructions
10
