32
Fig. 34
Fig. 36
Fig. 37
R. Final Assembly.
1.
Hold the swing seat vertically and insert uncoated chains
through the channels on the bottom of the swing seat.
Note:
A
coat hanger may be used to help pull chain through the swing
seat. One full link should show at each end of the seat
(Fig. 34)
.
2.
Place one covered chain onto each harness so that it fits at
the top of the V-hanger. Insert uncoated chains to bottom vinyl
hooks of V-hanger.
(Fig. 36)
. Crimp harness end closed.
CAUTION: It is important that you crimp harness ends
completely closed before using (see Fig. 36).
Place end of
harness with hooks on a hard surface and force hooks closed
with a hammer or squeeze closed with a pliers until parts are
touching.
WARNING: Open hooks can cause deep cuts.
3.
Hang the chains from the nylon bushing swing hangers. Crimp
the hook opening closed with a pliers to secure the chains to
the swing hangers
(Fig. 37)
. Make sure all connections are
tightly crimped and secure before using swing seat.
Fig. 35
NEVER
hang a swing seat by a partial
link of chain! Remove and discard
partial links.
Meijer.com
Summary of Contents for Alpine 611
Page 7: ...7 ALPINE Meijer com ...