30
(6)
1-1/4'' screws or
4D nails
(3)
2-1/2'' screws/nails
each side
(2)
2-1/2'' screws/nails
each side
Fig. 31
23 1/4
2 3/4
14 7/8
27
39 1/8
4 3/8
16 1/2
28 5/8
40 3/4
44
(Left Side Rail)
2'' x 4'' x 62-1/2''
2 3/4
14 7/8
27
4 3/8
16 1/2
28 5/8
40 3/4
39 1/8
44
2'' x 4'' x 62-1/2''
(Front)
(Right Side Rail)
• BOTTOM OF LADDER RAIL •
Top Corner of 2''
x 4''
Bottom
Corner of 2''
x 4''
2- 3/4''
From Bottom
(6)
1-1/4''
screws
E X A M P L E O F L A D D E R R U N G I N S TA L L AT I O N
STEP
BRACKET
Fig. 29
Fig. 30
O. Ladder Assembly.
1.
On ladder rails, mark all measurement locations for
each side with a pencil. Draw an angle line
connecting measurements for each ladder rung
alignment.
(Fig. 29)
2.
Align top of step bracket with line and screw in
place. Install a ladder rung at each of the four
locations.
(Fig. 29, 30)
Repeat on other ladder
rail.
3.
Attach 2'' x 4'' x 23-1/4 to siderails using
(2) 2-1/2'' screws/nails per side.
4.
Secure ladder to unit.
(Fig. 31)
Note: The top step
should be 11" below the deck and all steps should
be level.
5.
Screw (2) 2-1/2" screws/nails into the ends of each
ladder rung through the left and right side rails.
(Fig. 31)
(1) 2'' x 4'' x 23-1/4''
(4) 2'' x 4'' x 20-1/4''
(1) 2'' x 4'' x 23-1/4''
(4) 2'' x 4'' x 20-1/4''
Front Opening Option #1
(see page 38 for Climbing Rock Wall Front Opening Option #2.)
(2) 2-1/2'' Screws/Nails
(2) 2-1/2'' Screws/Nails
(2) 2-1/2'' Screws/Nails
(2) 2-1/2''
Screws/Nails
(2) 2-1/2''
Screws/Nails
(2) 2-1/2'' Screws/Nails
(2) 2-1/2'' Screws/Nails
(2) 2-1/2'' Screws/Nails
/nails
2-1/2'' or 10D
screw/nail
Meijer.com
Summary of Contents for Alpine 611
Page 7: ...7 ALPINE Meijer com ...
