MV-1238-1239-5-2018 . © All rights reserved Swim & Fun Scandinavia ApS
101
UK
2. Additional checks must be performed by a qualified technician:
• The function of all safety components must be checked.
• Check that all metal elements are correctly earthed.
• The power connection and fitting of the electric power cable must be checked
Important:
Incorrect installation can cause overheating and will void the warranty.
7. Instructions for use
The buttons and their functions
Press the following buttons and combinations in order to:
derefter
derefter
Start the heat pump. The led display shows the desired water tempera-
ture for 5 seconds, and then displays the water temperature and operat-
ing mode.
Stop the heat pump, which displays "OFF"
Exit and save the current setting.
Turn the machine on/off.
derefter
derefter
Press for 5 secs The heat pump goes into Auto mode and the HEAT and
COOL
lights come on simultaneously.
Press again for 5 secs and the heat pump exits the Auto mode, COOL
the light goes off and the heat pump now heats in SMART mode.
derefter
derefter
Hold both buttons down for 5 secs to lock/unlock the screen.
derefter
derefter
Set the water temperature directly.
derefter
derefter
To check the "utility parameter" from d0 to d11
derefter
derefter
Check/adjust the "utility parameter" from P0 to P7
derefter
derefter
Hold both buttons down for 10 seconds, the system will reset and display
"0000" on the controller.
