Swim & Fun ClearWater Pro 1002, Manual

Page: 56 / 92

Page 56
MV-1001-1002-1044-09-2016 . Swim & Fun Scandinavia . info@swim-fun.dk . www.swim-fun.com
© All rights reserved Swim & Fun Scandinavia ApS 2016
The pump is not running The filter system has been deactivated
by the filter timer or a filter control.
The plug is not connected.
The HFI device turns the pump off.
Damaged pump motor.
Examine the settings.
Connect the plug.
Turn on the HFI device again. If it immedia-
tely turns itself off again, it means the pump
or the HFI device is damaged.
Replace the pump.
Sand in the pool If the filter sand is new there are other
pieces of grit that have returned to the
filter.
Sand in the seven-way valve (residue
from backwash).
The separator wall in the filter tank is not
correctly positioned.
The foundation plate is damaged.
Carry out repeated backwash until the
backwash return water is totally clear.
Set the filter to the rinse function and pump
water to the outflow for about 30 seconds.
Check that the separator wall is correctly
positioned.
Exchange the damaged plate for a new one.
Repair of the filter pump may only be carried out by a qualified professional firm or the warranty will be void.
10. Spare parts
Contact your dealer for buying spare parts
No. Name Material QTY
1 Handle ABS 1
2 Bolt PA6+30%GF 1
3 Top cover ABS 1
4 Seal circle of elevator Rubber 1
5 Plastic gasket PA6+GF30% 1
6 Spring Stainless steel 1
7 Elevator ABS 1
8 Seal gasket TPE 1
9 Seal circle of top cover Rubber 1
10 Hydraulic pressure gauge 1
11 Filter cover PP+25%GF 1
12 Long connector ABS 1
13 Seal circle for appurtenance Rubber 2
14 Short connector ABS 1
15 Seal circle for long connector Rubber 1
16 Transparency cover PC 2
17 Seal circle of transparency cover Rubber 2
18 Seal circle of screw boss Rubber 9
19 5 x 25 Self tapping screw Stainless steel 9
20 Seal circle of filter bucket Rubber 1
21 Eliminator ABS 1
22 Bolt of clamp ring PA6+30%GF 1
23 Left clamp ring PA6+30%GF 1
24 Right clamp ring PA6+30%GF 1
No. Name Material QTY
25 M8 x 60 Bolt Stainless steel 1
26 Platic nut ABS 1
27 Small flashboard PP+25%GF 1
28 Filter plate ABS 1
29 Small filter bucket PP+25%GF 1
30 Drain valve PP+25%GF 1
31 Seal circle for drain valve Rubber 1
32 Short flexible hose subassembly PE 1
33 Hose clamp Stainless steel 1
34 M6 Butterfly nut Steel 2
35 M6 Gasket Steel 2
36 M6 Skidproof gasket Steel 2
37 M6 x 35 Bolt Steel 2
38 Baseplate PP+40%GF 1
39 Big platic gasket PA6+30%GF 1
40 Water pump 1
41 Pump connector PA6+30%GF 2
42 Connector o-ring Rubber 2
43 Transparency cover o-ring Rubber 1
44 Transparency cover PC 1
45 Circumgyrate cover ABS 1
46 Pump filter PE 1
47 Pump drain valve PP+25%GF 1
48 Drain valve o-ring Rubber 1