![Swim & Fun ClearWater Pro 1002 Manual Download Page 48](http://html1.mh-extra.com/html/swim-and-fun/clearwater-pro-1002/clearwater-pro-1002_manual_1414139048.webp)
Page 48
MV-1001-1002-1044-09-2016 . Swim & Fun Scandinavia . [email protected] . www.swim-fun.com
© All rights reserved Swim & Fun Scandinavia ApS 2016
Position the filter lid on the back edge of the filter tank so that the grey pump connection ”from pump”
in the seven-way valve is pointing forward. Check that the lid is tightly sealed all the way round.
Diagram over the exterior of the filter tank
4.2 Interconnection of the sand filtering system
First, grease the three valves on the filter tank with a little Vaseline so as to facilitate easy attach
-
ment of the hose. Then attach a black hose valve with an O-ring on the pump’s exit side (at the
top) and fasten it. Grease, if you will, with a little Vaseline the pump’s attached hose valve. Now
slot the attachment hose and the grey pump connection into place on the pump and the filter tank
respectively. Fasten the hoses tightly with the accompanying tightening straps and check that the
hose is secured. See photo 4.2.
Photo 4.2
Thereafter, the filtering system is connected to the pool (in this case flexible connection with pool
hoses). A pool hose is attached to the pool’s skimmer (or the pool’s output connection) and is con
-
nected in the same way to the pump’s input connection (the suction side). This hose transports the
uncleaned pool water to the filtering system. Another pool hose, which leads the cleansed water
back to the pool, is attached between the filter lid’s connection ”to pool” and the pool’s input con
-
nection. A third hose can also be attached to the filter lid (to drain) with the other end of it placed
by an outflow. All three pool hoses are attached with tightening straps. (Pool hoses and tightening
straps are purchased separately) Any perviousness in the passages can be remedied by putting
Teflon tape on the connections/threads.
Connection to the attachment hose from the pump
Opening in the lid towards UV light
”Anchor point” on the lid
Filter lid
”Anchor point” at the clean water storage tank
Gasket
Clean water storage tank
Summary of Contents for ClearWater Pro 1002
