![background image](http://html1.mh-extra.com/html/swift/stl524b/stl524b_user-manual_1413882009.webp)
SWIFT
®
STL524B Desktop Label Printer User’s Manual
7
and the error indicator is off. The printer enters the normal working mode.
3.2.2 Self test
Close the paper case, press the
【
FEED
】
button, then turn on the power. At this
time, the printer will immediately print out the self-test. Parameters in the self-test will be
different for different models.
Self-test can detect whether the printer is working properly. If the self-test can be
printed correctly, it means the printer works normal except for the interface of the host.
Otherwise it needs to be repaired.
Self-test prints out parameters in fellow order: manufacturer name, printer model,
software version, interface type, default value of printer parameters, 96 characters in
ASSIC code, default code page content (language setting is English) or Chinese
character library name ( The language is set to Chinese) and the barcode type.
3.2.3 Paper feed (manual paper feed)
Receipt paper mode: In the power-on state, put in the ordinary thermal paper,
press the
【
FEED
】
button, the printer starts to feed the paper, release the
【
FEED
】
button to stop the paper feeding;
Label mode: In the power-on state, put in the thermal label paper, press the
【
FEED
】
key. The printer forwards the paper to find the label gap, and sends the label
gap to the tear line position.
3.2.4 Hexadecimal printing
Follow the steps below to turn the printer into hex print mode.
1. Open the paper cover;
2. Press the
【
FEED
】
button to turn on the power. Wait for the power indicator and
the error indicator to flash alternately, then close the paper cover.
3. At this point, the following 3 lines of content are printed:
Hexadecimal Dump
To terminate hexadecimal dump,
Press FEED button three times.
It indicates that the printer enters hex mode. In this mode, all inputs will be printed
as hexadecimal numbers. Each press of the
【
FEED
】
key will feed a line of paper.
Press 3 times in total, and it will print out "*** Completed * **", which means exit hex
print mode.