ELECTRICS
62
ELECTRICS
ELECTRICS
62
Pump Button
. With the power on, press the pump button to turn the water
pump on. Press the button again to turn the pump off. The adjacent LED
will illuminate when the pump is on and the level of the water tank will be
shown on the screen.
Interior Lights Button
. With the power on, press the lights button to turn
the main lighting supply on or off.
Light Dimming Button
. With the power on, press the dimmer button to
turn the dimmed lighting on or off. Press the select button to adjust the
dimmer level (the menu automatically changes to the adjustment screen).
The last setting is remembered.
Awning Light Button
. With the power on, press the awning light button to
turn the awning light on or off. The Adjacent LED will illuminate when the
awning light is on. The awning light may also be controlled by the caravan
alarm system.
Note, display illumination.
The LCD back
light will illuminate for the pre-set time (default
time is 30 seconds) adjustable between 5 and
120 seconds. Setting the timer to 0 seconds
will force the backlight to be permanently on.
The illumination of the blue LED’s adjacent
to the power, pump & awning light buttons
can be configured in the same way as the
backlight. The screen will wake up if your
hand is placed near the panel or if a button is
pressed.
2.6 Operation while driving
The EC600 system is designed to shutdown
parts of the system while the engine is running.
This is to meet Electro Magnetic Compatibility
(EMC) regulations and to ensure the safe
operation of the caravan.
Please ensure the system shutdown switch on
the PSU is in the on (button in) position before
driving (see 2.2). This will ensure the electronic
system is active and will therefore be able
to control the charging process, supply the
refrigerator and monitor other system circuits.
With the engine running the screen will show
ENGINE RUNNING, the leisure and vehicle
battery icons will be displayed to indicate they
are being charged and the charging voltage
will be show in the main display.
SWIFT COMMAND POWER CONTROL SYSTEM
Summary of Contents for Basecamp 2018
