SWF MA-6, User Manual, Page: 74 / 76

74
11.2.7) Memory
700
701
702
703
704
No embroidery data in the
memory
Insufficient memory
Memory full
Design memory system
Bad memory battery
No embroidery data in the
memory
Unable to copy data to memory
due to insufficient memory
100 memory rooms are full
Error in copy/delete between
memories
Run out of battery that keeps
memory data during power off.
Unstable storage of data, i.e.
number of stitches, X/Y position,
etc.
Store data in memory via disk
Delete unnecessary data
Delete unnecessary data
RESET or turn the main power
off and on again.
Consult the nearest SWF for
battery change
(if battery outages are frequent,
replace CPU board)
No. Error Description Troubleshooting
11.2.8) Tape reader and communication
630
640
Error in input data
Unable to find network device
Error in the data from tape reader
Network device is not connected
Re-read data from tape reader
Check connection of network
device
No. Error Description Troubleshooting
11.2.9) System installation
800 System installation disk Installation performed without
using system installation disk Check the system installation
disk
No. Error Description Troubleshooting