SWF MA-6, User Manual, Page: 60 / 76

TROUBLESHOOTING
11
60
11.1) CAUSES AND TROUBLESHOOTING
Inspect/repair the machine by the guideline in machine failures.
CAUTION DANGER
Operation failure
Incorrect Stop
Position
① Loose belt tension or belt
damage
② Power failure or short-circuit
of fuse
③ Failure to detect signals for
needle position or for 1
rotation
④ Frame out of X or Y limit
①
Loose tension on main
driver belt
②
Incorrect position of encoder
or bad encoder
■
Adjust belt tension/ change
belt
■
Change fuse in the power
socket
■
Manually move color
change. Check if the signal
blinks at the correct needle
position in the operation box
■
Adjust design start point
(Move the frame manually
so the design comes into
the scope)
■ Change belt
■ Adjust position or change
encoder
Check
①
main driver belt
② X-Y timing belt
Inspection & Repair Cause Error Type Reference