Doc:
101547
-GB-2140
16
Bergvägen 7 | SE-341 32 Ljungby | Sweden • Tel +46 (0)372-156 00 | www.swepac.com
F82B
F92B
Check before charging
• No foreign material is in the intake/exhaust port of the
battery charger and the battery pack.
• Charging cable, AC cable and battery pack to be charged
are not damaged.
• There is no dirt or foreign matter in the charging
connector
or the battery connecto
r.
Procedure to start charging
ALERT ERROR
B00047
4
2
5
3
1
6
• Place the battery charger (1) in a level and stable
location.
• Plug the AC plug into an electric outlet. The battery
charger’s POWER indicator (2) lights.
• Place the battery pack (3) in the center of the battery
charger. If the battery pack is not positioned correctly
the battery pack cannot be cooled while it charges. If
so charging may be stopped by the high-temperature
protection function.
• Connect the charging connector (4) to the battery
connector (5). All the indicators on the battery charger
and the battery pack light for about one second. After
that, just the battery charger’s POWER indicator lights and
charging starts automatically.
• The charge level indicator (6) on the battery pack lights
or flashes according to the state of the charge.
Indicator display
Charge level
Fully charged.
High
Charging.
Low
Charging has stopped.
:On
:Flashing
:Off
Procedure after charging
When the battery pack is fully charged, charging stops
automatically and the charge level indicator on the battery
pack turns off.
• Remove the charging connector from the battery
connector.
• Unplug the AC plug from the electric outlet.
• Put the charging connector and AC plug back in their
holders.
Procedure to stop charging
You can also stop charging and remove the battery pack
before it is fully charged.
• Remove the charging connector from the battery
connector.
• Unplug the AC plug from the electric outlet.
• Put the charging connector and AC plug back in their
holders.
