©2022 SwellPro All Rights Reserved
45
Headless
H
In Headless mode, the head orientation of the drone is
dismissed. The drone can now move in the direction with
respect to your point of view. This makes controlling the drone
from afar more intuitive and makes manual return-to-home a
lot easier when you cannot see the head direction of the drone.
Manual
M
In Manual mode, the drone is NOT going to maintain its height
and position. The height, position, and speed of the drone need
to be controlled manually in this mode, but the drone is going
to maintain level during the flight.
⚠
This mode should ONLY be used for experienced and skilled
users. Please use with caution.
Boat
B
In Boat mode, the SplashDrone 4 can effectively be controlled
like a boat on the surface of the water. To move the drone
forward, pull the right joystick up. To move the drone's
direction left or right, pull the left joystick left or right to control.
The drone is not able to move backward in boat mode. The
drone's speed is limited to 1 m/s. In Boat mode, the App's
mission planning can be used normally: tap to fly, waypoints,
mapping, orbit.
To enter the Boat mode:
1.
Land or place the drone on the water.
2.
For landing on the water, lock the drone.
3.
Switch the drone to GPS or ATTI mode.
4.
Arm the drone by using the inward gesture.
5.
Press the BOAT button on the remote controller.
6.
The drone now enters the Boat mode.
7.
Press the BOAT button again to exit Boat mode. The
drone can then take off normally.
Boat mode Application:
For underwater photography and underwater search, use
SwellPro gimbal cameras and an extension bar. For fish
searching, use SwellPro fish finder Dronar 01.
For overwater photography, use SwellPro gimbal cameras and
the Gimbal Overhead Kits.
⚠
Boat mode can ONLY be used when the drone equips with
SwellPro Boat Mode Kit (BKT). DO NOT use the Boat mode
without the floating foams. Using Boat mode on the water
without floating foams can result in serious damages to the
propellers and motors.
