©2022 SwellPro All Rights Reserved
13
⚠
Always place one hand under the motor to support it when installing or removing
propellers. Failure to provide this support could result in bending or breaking the landing
gear.
⚠
The propellers are sharp, please be careful to avoid injury.
⚠
Before each flight, please check that the propellers are smooth all over and are
correctly installed and securely fastened.
⚠
Do not use broken propellers. Replace the propeller if there is any damage or wear to
the propeller.
⚠
Spin each propeller by hand to check that the motors are free of sand or salt and spin
freely.
⚠
The blades are sharp, please be careful to avoid injury.
Install the Intelligent Battery
The Intelligent battery is quick and easy to change. Ensure the battery is OFF before
inserting or removing it from the drone.
1.
Unlock and open the
waterproof hatch
2.
Slide in the fully charged
intelligent battery and
push it firmly into the
battery slot.
3. Close the battery hatch.
Fasten the catch and then
lock the hatch.
⚠
Always check to ensure that the waterproof seal on the hatch door is clean and
lightly lubricated.
⚠
The drone is no longer waterproof when the battery hatch is open. Do not allow water
or sand to enter the drone while the battery hatch is open.
⚠
The Appendix of this manual contains additional warnings and precautions regarding
the batteries, safety, charging, and maintenance. Please familiarize yourself with all the
information.
