7
•
The machine is for indoor use only. Keep away from moisture!
•
Operate in room temperature only. Min. operating temperature is +10
C, max.
temperature is +30
C.
•
NEVER cover vents or air inlets on machine housing.
•
NEVER use dimmers to control the power to the machine.
•
Service internal parts ONLY if you have the know-how and experience to perform the
service correctly. If not, please contact a Swefog service center or the manufacturer.
NOTE: Incorrect service and/or use of non-original spare parts will void the warranty.
•
NEVER change or modify internal parts, use original spare parts only!
•
NEVER disconnect the mains power if the machine is switched on. ALWAYS switch
machine off using the 1-minute switch off purging cycle, see this manual, chapter
operation . Disconnecting from mains while machine is in operation will clog heat
exchanger and cause damage to the machine, not covered by warranty.
•
NOTE: If there is a fluid leakage or spillage, wipe off fluid. DO NOT use the machine until
it is mended.
•
NOTE: The haze may cause residues on mirrors, lenses and similar components if the
fog concentration is too high in the air. Equipment using fan ventilation may draw haze
through the lamp housing, which may cause residues. Always check carefully where to
direct the output of the machine, and keep equipment that uses fans away from the
haze.
5. INSTALLATION AND PRECAUTIONS:
•
Make sure the area in which this product is to be used is well
ventilated.
•
Do NOT install the machine directly above an audience.
•
Do NOT direct the haze outlet directly towards an audience.
•
Do NOT operate near flammable materials.
•
Do NOT expose to rain or moisture. Use indoors only.
•
Use only Swefog K1 molecular fluid in this machine.
•
Use responsible concentrations of haze to create atmospheric
effects.
•
Not for residential use.
•
Must be handled by qualified personnel at all times.
Summary of Contents for K1 HAZER
Page 1: ...K1 HAZER 40510 230 K1 Hazer EU version Rev 1 2019 10 03...
Page 28: ......
