background image

2

Introduction

Thank you for buying SWEDX XV1-xx LCD-TV. Please read this manual thoroughly before 
operating the TV. Make sure the display was not damaged in transit. Should the TV be damaged, 
please contact your dealer and do not install it. Check that you have all the accessories according 
to the model.

Safety precaution

Do not place the TV on unstable places, from which it may fell off.

Do not expose the TV to extreme temperature and humid environment.

Avoid subjecting the TV to direct sunlit and other heat sources.

Do not put the TV into any liquid.

Do not put anything inside the TV, or place water container on top of the TV.

In thunder rainy days (especially with lightening), please plug out the power plug and antenna 
plug.

Do not step on the power cable, or tangle them together

Avoid overload of the exterior electric outlet to prevent fire hazard of electric shock.

Clean the TV with dry and soft cloth (without evaporative matter).

lf your TV is broken, do not repair it by yourself, but contact the maintenance personnel.

lf the remote control is left unused for a longtime, please take the batteries out and store them 
in dry places.

Avoid dropping the remote control.

lf the LCD TV is installed for exhibition purpose, please do not place the overheated part on 
the ground or carpet to prevent accident.

Please install the TV at proper position, such as wall or ceiling. Please install it under the 
guidance of professional staff. (When used or exhibit, please do not place the TV horizontally or 
vertically on the ground.)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions:(1)this device may not cause harmful interference, and (2)this device must accept any 
interference received, including interference that may cause undesired operation.

This equipment should avoid from water drops and things that fill with liquid, such as vases, 
cannot be placed on this equipment.

This equipment is predeterminated to work constantly (unless adding switch on this equipment)
Please disconnect the power cord if this equipment will not be used for a long time

USER GUIDE

“Design and specifications are subject to change without notice”

Summary of Contents for XV1- 32

















Reviews: