TV MENU
Use same navigation way as in the picture menu to
navigate the TV menu.
OSD USER FUNCTIONS FOR TV MENU
Auto Tune
Manual Tune
Fine Tune
Chanal Swap
Skip
ON/OFF
Color System
AUTO
PAL
SECAM
Sound System
AUTO
D/K
B/G
I
L
Nicam
Mono
In order to receive TV program, signal should be
receivedfrom one of the following signal sources:
• Outdoor antenna.
• Cable TV network
• Satellite broadcast network
1. In these three cases, the input cable of antenna or
TV network should be plugged in the 75 Ohm
coaxial cable jack at the rear side of LCD TV.
2. lf you are using indoor antenna and the effect of
TV program is not satisfactory, you can adjust the
position of the antenna until the picture is clear.
When installing LCD TV, please use special 75 Ohm
coaxial Cable. If other coaxial cable is used, there
may be noise and image disturbances.
PC menu
Use same navigation way as in the picture menu to
navigate the PC menu.
OSD USER FUNCTIONS FOR PC MENU
H Position
V Position
Clock
Phase
Auto
12
USER GUIDE
“Design and specifications are subject to change without notice”