background image

 

 

TTP 5250 Kiosk Printer Evaluation Kit – Getting Started 

0110 

Related manuals 

 

TTP 5000 Operating Instructions (00809-000) 
TTP 5100/5200/5250 Operating Instructions (38-1081-00) 

TTP 5000 Installation Manual (00761-000) 
TTP 5200/5250 Installation Manual (01436-000) 

TTP 5000 Technical Specification (00873-000) 
TTP 5200/5250 Technical Specification (01441-000) 

 

 

 

 

 

This is a publication of Swecoin AB 
Box 322, SE-192 30 Sollentuna, Sweden 

Phone 

+46 8 623 45 60 

Fax 

+46 8 594 709 89 

E-mail 

[email protected]

   

 

[email protected]

  

Web site 

www.swecoin.se

 

 

 

© Swecoin AB 1997, 2001 

All rights reserved. Reproduction in whole or in parts is 
prohibited without written consent of the copyright owner. We 
have taken great care to ensure that the information in this 
manual is correct and complete. However, if you discover any 
errors or omissions, or if you wish to make suggestions for 
improvements, you are welcome to send your comments to 
us. Swecoin AB disclaims any liability resulting from the use 
of this information and reserves the right to make changes 
without notice. 

 

Edition D, October 2001 

Printed in Sweden 

Summary of Contents for TTP 5250















Reviews: