InstructIon booklet
InstructIon booklet
InstructIon booklet
InstructIon booklet
9
InstructIon for cuttIng
VarIous cross sectIon materIals
INSTRUCTION FOR CUTTING
VARIOUS CROSS SECTION MATERIALS
Note: ALWAYS use the lubricating device (included) when cutting Aluminum,
Copper, Stainless Steel & Cast Iron materials, because they have a tendency to
smear and adhere to the blades. But for normal steel plate and steel tube cutting
is no need.
If run out the lubrication sticks, the best way is add Lubricating oil (5W-20
or 5W-40) in the saw blade teeth area. It will help to get smooth cutting
surface and keep the blade teeth sharpening for all kinds of metal cutting.
15
Note:
ALWAYS use the lubricating sticks (included) when cutting Aluminium, Copper, Stainless Steel & Cast Iron
materials, because they have a tendency to smear and adhere to the blades. But for normal steel plate and steel tube
cutting there is no need.
If run out the lubrication sticks, the best way is add Lubricating oil (5W-20 or 5W-40) in the saw blade tooth area.
It will help to get smooth cutting surface and keep the blade teeth sharp.
Aluminium & Copper
