InstructIon booklet
InstructIon booklet
6
InstructIon booklet
InstructIon booklet
warnIng
1.
Do not let familiarity with the tool make you relax the rules; it only takes a fraction of a second for something to go
wrong.
2.
Always let the blades get to full speed before commencing cutting.
3.
Always ensure that both blades contact the job at the same time.
4.
The side of the blade cannot be used for cutting.
Intended use
This Saw is supplied with TCT saw blades that are only intended for use on Metal, Wood and Plastic. If you are using the
Diamond blades they may only be used for cutting Stone and Ceramics.
usIng the saw
1.
Always use this saw according to the instructions in the manual
2.
Never place the saw on a piece of the material that will fall off once cut
3.
Always use the wax strips provided.
4.
All by - standers must be a minimum of 5 metres away unless you have an approved barrier by WHS standards
