tM 35 / DE
tM 35 / DE
12
13
tM 35 / EN
tM 35 / EN
Pressing the plus (3) and minus
(4) buttons simultaneously for 3
seconds switches this function eit-
her on or off. The tilt sensor detects
whether the device is in a shooting
position as a thermal imaging clip-
on device.
The tM 35 switches off if the tilt
angle is greater than 70° (upward or downward),
for example, if you stand the rifle up vertically. The
tM 35 also switches off if the lateral tilt is greater
than 30°, for example, if you rest the rifle on your
legs.
When you return the rifle to the shooting position, the
tM 35 automatically switches on.
After one hour without operation, the device switches
off completely.
3.7 AUTOMATIC BRIGHTNESS ADJUSTMENT
The tM 35 has an automatic brightness adjustment
feature that automatically adapts the brightness of
the display when the device is switched on or when
activated by SWAROLIGHT. The tM 35 recognizes
whether you are using the device during the day,
in twilight, or at night. The brightness of the display
ON
OFF
OFF
ON
ON
OFF
OFF
For use as a thermal imaging clip-on device
SL ON/OFF
3s
can also be adjusted using the plus (3) or minus (4)
buttons.
The display of the tM 35 has 32 brightness levels
and can be dimmed very low at night to avoid
dazzling. The tM 35 also has a memory function in
the day, twilight, and night range. If your selected
brightness level in one of the three ranges differs from
the default setting, the tM 35 will save this custom
brightness setting and apply it when the device is
next activated or switched on.
4. FOR USE AS A THERMAL
IMAGING CLIP-ON DEVICE
Your tM 35 has been developed specially for use
as a thermal imaging hand-held device and as a
thermal imaging clip-on device in combination with a
SWAROVSKI OPTIK rifle scope and the SWAROV-
SKI OPTIK tMA thermal monocular adapter. When
using this SWAROVSKI OPTIK complete system,
we guarantee a maximum impact point deviation of
4 cm at 100 m/1.44 in at 100 yds (distance of the
average impact point of two shot groups at 100 m/
100 yds – with and without thermal imaging clip-on
device).
4.1 ADJUSTING THE RIFLE SCOPE
In clip-on mode (1x magnification), the tM 35 is opti-
mized for use in combination with a SWAROVSKI
OPTIK rifle scope. In this case, only the central
rectangular part of the display of the tM 35 is used
(1x magnification). If required, you can select the
magnification for your rifle scope using the magni-
fication adjustment ring. We recommend using a
variable rifle scope with a starting magnification of
≤ 3x.
Summary of Contents for tM 35
Page 98: ...tM 35 DE tM 35 DE 194 195...
Page 99: ...tM 35 DE 196...