tM 35 / DE
tM 35 / DE
10
11
tM 35 / EN
tM 35 / EN
3. OPERATION
3.1 SWITCHING THE DEVICE ON
ON
Hold down for 1 second
OFF
Hold down for 2 seconds
ON
OFF
1s
2s
SL on
1x
1
2
3
3.2 EXPLANATION OF SYMBOLS
A menu bar is visible on the bottom edge of the
display. This is automatically hidden after 5 seconds
and appears again when the user presses a button
or when activated by SWAROLIGHT.
1 SL on = SWAROLIGHT activated
SL off = SWAROLIGHT deactivated
2 Battery status with 5 levels
3 Magnification:
1x as a thermal imaging clip-on device
4x as a thermal imaging hand-held device
3.3 CAMERA CALIBRATION
The camera is calibrated automatically after swit-
ching on, waking from sleep mode, or in the event
of temperature changes. The image briefly freezes
during this time. This is not an error.
3.4 SWITCHING FROM
BLACK HOT/WHITE HOT
Briefly press the mode button (5) to change the
setting. In Black Hot mode, objects with high thermal
radiation appear darker than objects with lower
thermal radiation. The image is reversed in White
Hot mode.
SL on
1x
SL on
4x
4x
1x
2s
3.5 HAND-HELD AND CLIP-ON MODE
Press the mode button (5) for 2 seconds. This toggles
the display between 1x (clip-on) and 4x (hand-held)
mode.
In clip-on mode, only the central part of the display
is used (1x magnification). In hand-held mode, the
complete display is used (4x magnification) The field
of view remains the same in hand-held and clip-on
modes.
3.6 SWAROLIGHT
The tM 35 has a tilt sensor. The tilt sensor works both
when used as a thermal imaging clip-on device and
as a thermal imaging hand-held device.
ON
OFF
OFF
ON
ON
OFF
OFF
For use as a thermal imaging hand-held device
Summary of Contents for tM 35
Page 98: ...tM 35 DE tM 35 DE 194 195...
Page 99: ...tM 35 DE 196...
