73
The PIR Movement Sensor
1. LED
- Will flash red to indicate
that movement has been
detected.
2. PIR Sensor
- Is an electronic
sensor that can detect warm
moving objects in its field of view.
1234
ON
OFF
1 2 MODE
ON
OFF
1-pulse
OFF
ON
2-pulse
OFF
ON
3-pulse
3 4 MODE
ON
OFF
TEST
OFF
ON
NORM
AL
OFF
ON
C
ODING
1
2
3
4
3. Tamper Button
- If the back
cover has been removed, an alert
will be sent to the NVR.
4. DIP Switches
- Do not adjust
these as they have been set
correctly during manufacture.
Using a flathead screwdriver, in-
sert this into the clip at the bottom
of the movement sensor to open
the back cover.
Install the provided 3V battery into
the battery compartment. Put the
cover back on when you have
finished and follow the pairing
instructions on page 6.
Insert the mounting bracket at
the top of the movement sensor.
Push down until it clicks into place
as illustrated above.
