11
Mobile Device Setup
1.
On the Dashcam, enable the
WiFi-Local
setting.
After a short moment, the Dashcam will restart and
display its Wi-Fi network name (SSID) at the top of
the screen for a few seconds.
2.
Go to your mobile device’s Wi-Fi settings screen
and select the Dashcam Wi-Fi network name from
the list of available networks.
3. Launch the
DriveEye Ultra
app.
4. On the Home screen, tap
Local
and then select the
Dashcam’s Wi-Fi network name from the list.
Note:
If the Dashcam’s Wi-Fi network name doesn’t
appear, tap
to rescan.
Turn off the Dashcam’s Wi-Fi when you’re not
using it to extend the Dashcam’s battery life
between charges.
To prevent loss of data, your mobile device will not
be able to connect to the Dashcam while there is
an ongoing recording.
