background image

5

4

HOW TO USE

HOW TO USE

Before first use, remove all packaging

It is important to ensure the correct plug adaptor is used when operating in a country 
not using the UK 13 Amp socket system. If in doubt, consult a qualified electrician.

• 

Do not remove the teapot from the base during the filling cycle as scolding water 
will be ejected. 

• 

After filling the tank, ensure the cap is properly secured. Do not open the cap 
during the boiling cycle

• 

After the tea making cycle is complete, wait a few minutes before removing the 
filler cap as it will be hot.

• 

Fill the ceramic jug with water to 1” (25mm) below top. 

• 

Open the lid and remove the tank cap by turning it anti-clockwise

• 

Pour the water from the jug into the tank and replace the tank cap by turning it 
clockwise.

• 

Place the ceramic jug back on it’s stand on the TEASMADE, ensuring that it is 
resting firmly against the safety switch

• 

Press the TEA NOW  button and wait

• 

In a few minutes the water in the tank will boil and be ejected into the pot. You 
will hear the traditional TEASMADE woosh! as the water is ejected from the tank 
into the ceramic pot.

• 

Once this process is complete, discard the water from the pot

• 

Your TEASMADE is now clean and ready to use.

SETTING THE CLOCK

Remove the lid from the Teasmade. There are 2 adjustment knobs. One is to set the 
clock, the other is to set the alarm. Set the clock first then set the alarm. Note: The 
clock adjustment knob needs to be pressed down and turned.

ALARM WITH TEA BUTTON

This button overrides the ON setting of the ALARM ONLY function.
This button has 3 settings: 

• 

SET (for Tea+Alarm)

• 

OFF (for no function)

• 

TEA NOW (starts the tea making process on pressing if the tank is filled and the 
jug is in position)

• 

In the ON position, tea making will start at selected alarm time.

ALARM ONLY BUTTON

Set Alarm with Tea button to OFF position. 
Use this button when the tea making function is not required. This button has 3 
settings:

• 

SET (for Alarm only)

• 

OFF (no function)

• 

SNOOZE (alarm will resound after about 4 minutes)

• 

Snooze can still be set while alarm is sounding.

TEA WITH ALARM

Use the jug to fill the tank (do not over-fill). Put Teabags (or required amount of coffee 
into the empty jug a place in the jug dock ensuring that the safety switch is pressed. 

Put the ALARM+TEA button into the ON position. The tea making process will start at 
selected alarm time before the alarm sounds. This setting will override the ON setting 
of Alarm Only function.

CHANGING THE PICTURE

To remove the picture frame grasp the tag inside the recess on the left of the 
Teasmade. The photo frame can be pulled out. Change the photo to a suitably sized 
one of your own and replace the photo accordingly.

CLOCK LIGHT DIMMER 

Remove the lid to find the clock light dimmer control. Adjust for best night time 
conditions.

CLEANING & MAINTENANCE

Ensure the product is unplugged from the mains and completely cooled before 
cleaning. The pot should be cleaned daily with warm soapy water, then rinsed with 
clean water. Do not leave water in the tank for long periods. Wait until the product 
has cooled before emptying the tank. The outside of the unit can be cleaned with a 
soft cloth moistened with a mild detergent solution. 

DO NOT USE CHEMICAL OR ABRASIVE CLEANERS. DO NOT IMMERSE THE UNIT IN 
WATER.

DESCALING

Excessive lime scale build-up will hurt your precious TEASMADE! It is important to 
de-scale the product regularly in order to maintain best performance. Use a good 

圆形透明底贴纸直径12mm

STM202_IM.indd   4-5

02/09/2015   08:15

Reviews: