7
6
We Swan Products Ltd declare that this product conforms to the following product legislation in
accordance with the following directive(s):
2004/108/EEC The EMC Directive (the Electromagnetic Compatibility Directive).
2006/95EC. The LVD Directive (Low Voltage Directive).
2011-65-EU. The RoHS directive (Restriction of Hazardous Substances Directive)
80/590/EEC and 89/109/EEC Food Contact
DOCUMENTATION
HOW TO USE
The wires in the mains lead are coloured in accordance with the following code:
BLUE
NEUTRAL
BROWN
LIVE
GREEN/YELLOW
EARTH
As the colours of the wire in the mains lead of this appliance may not correspond with the colour markings
identifying the terminals on your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or
coloured black. The wire which is coloured BROWN must be connected to the terminal which is marked
with the letter L or coloured red. The wire which is coloured GREEN/YELLOW must be connected to the
terminal which is marked with the letter E or (earth symbol) and is coloured GREEN or GREEN/YELLOW.
WARNING: THIS APPLIANCE MUST BE EARTHED
BS PLUG
DISPOSAL OF UNIT
Appliances bearing the symbol shown here may not be disposed of in domestic rubbish. You
are required to dispose of old electrical and electronic appliances like this separately.
Please visit www.recycle-more.co.uk or www.recyclenow.co.uk for access to information
about the recycling of electrical items. Please visit www.weeeireland.ie for access to information
about the recycling of electrical items purchased in Ireland. The WEEE directive, introduced in
August 2006, states that all electrical items must be recycled, rather than taken to landfill. Please arrange
to take this appliance to your local Civic Amenity site for recycling, once it has reached the end of its life.
WARRANTY
This product is guaranteed for 2 years from the date of original purchase. If any defect arises due to faulty
materials of workmanship the faulty products must be returned to the place of purchase. Refunds or
replacement is at the discretion of the store.
The following conditions apply:
•
The product must be returned to the retailer with proof of purchase.
•
The product must be installed and used in accordance with the instructions contained in this
instruction guide.
•
It must be used only for domestic purposes.
•
It does not cover wear and tear, damage, misuse or consumable parts.
•
Swan Products Ltd has limited liability for incidental or consequential loss or damage.
•
This guarantee is valid in the UK and Eire Only.
SWAN BRAND HERITAGE
de-scaling agent available from most supermarkets. Fill the tank using the pot and
include the de-scaling agent. LEAVE THE FILLER CAP OFF on this occasion. Place the
empty pot on it’s stand, ensuring it is in contact with the safety switch. Press the TEA
NOW button. The water in the tank will boil. Note: With the filler cap off there will be
an increased amount of steam so be careful. Once the water in the tank is boiling,
press the TEA NOW button to switch it off.
Carefully replace the filler cap and press the TEA NOW button once again. The
water will be ejected into the pot. This will de-scale all the pipes and tubes inside the
TEASMADE. Once de-scaling is complete, allow the unit to cool and rinse the tank and
pot in clean water.
Did you know...
Components for the Swan Teasmade
were still being made at the original
Bullpitt & Sons factory on Camden St,
Birmingham as recently as 2006.
Camden St, Birmingham
STM202_IM.indd 6-7
02/09/2015 08:15
