5
HOW TO USE
Lift the blade bracket, tip the can so that its rim is under the locat-
ing post, the lid of the can will be attracted by the magnet, then
press down the right side of blade bracket, making sure the blade
is inside the rim (see illustration below), drive wheel will actuate the
can to rotate and the blade will cut the can open. Because of the
hands-free feature, it is not necessary to hold blade bracket down
or support the can during cutting. However, you may have to hold
the housing of can opener when cutting very tall or heavy cans.
When the can is opened, the can opener will stop automatically, to
remove the can, hold it with one hand and raise the blade bracket
with the other.
Caution: Avoid contacting with the cut edges of the can or lids
as they are sharp. Carefully remove the lid from the magnet and
discard.
Note: The time of opening cans continuously should not exceed 5
times without a rest periods of 15 seconds between every 5 cans.
This is to allow the motor to cool sufficiently.
You may feed excess cord into the back of the unit and feed the
cord through the notch for convenient storage.
SP20110N_IM.indd 5
13/03/2018 08:35
