27
Network: General
As SwannLink Peer-to-Peer technology is utilised to communicate with
your network and mobile device, configuration of the network settings is
not required. If you have networking expertise and require specific set-
tings for your network, your NVR does have the ability to change them.
Network Access:
You can select between two different network types
that your NVR can be connected to. The two types are -
DHCP (Dynamic Host Configuration Protocol):
This is a system where
your router will automatically assign an IP address to each device con-
nected to your network.
Static:
This requires that all devices on your network have their IP ad-
dress manually defined.
IP Address:
Each device on your network must have a unique IP address
to identify itself. A typical address might be “192.168.1.24” or something
similar.
Subnet Mask:
This allows the flow of network traffic between hosts to be
segregated based on a network configuration. A typical address might
be “255.255.255.0” or something similar.
Default Gateway:
This allows your NVR to connect to the Internet. This
is typically the same IP address as your modem or router.
Auto DNS/Static DNS:
Select how would like to define your DNS servers.
It’s recommended to leave this on auto.
• Click the “Default” button to revert back to default settings.
• Don’t forget to click “Apply” to save settings.
