13
Motion: Motion Detection
Detecting motion is an essential part of your security system. When mo-
tion has been detected by one or more cameras, a signal is sent to your
NVR, alerting you to a potential threat in your home. It does this by send-
ing an email and sending an alert to your mobile device or computer.
The entire view of the camera is enabled, however you can select cer-
tain areas if you wish. In the above example, a detection zone has been
created for the windows and dining room entrance. Movement outside
of these zones will not be detected.
1.
Right-click the mouse to access the sub-menu then click “Delete All”.
2.
Click and drag to select the area that you want to create a zone for.
Multiple zones can be created. The same action also applies if you want
to delete a zone that has been created.
3.
Right-click the mouse to access the sub-menu then click “Sensitivity”
to adjust the sensitivity level (see above) if required.
4.
Right-click the mouse to access the sub-menu then click “Save” to
save any changes that you have made. To revert back to default settings
click “Add to All” or click “Cancel” to exit.
• Click the “Default” button to revert back to default settings.
• Don’t forget to click “Apply” to save settings.
• Click “Cancel” to exit.
Using the “Sensitivity” function, you can
change the motion sensitivity for each time
period available. Move the slider left or right
to change the sensitivity level.
2016/01/19 10:30:15 Tue
Camera4
