1. Check the Handle, the clean water tank, the dirty water tank, the Li-ion battery
pack, the roller brush, make sure all of them are installed correctly and tightly.
2. Press the switch button on the handle to turn on the cleaner. Press the Eco/
Max Mode button to switch the suction power.
3. There will be Voice Assistance providing operation support. This function
can be switched off by pressing the voice switch button.
4. Hold the spray button for 8 seconds to prime the cleaning water/solutions
before each use. Spray the water according to your personal use during
the cleaning.
5. Hold the handle and pull the cleaner forward and backward to clean your floors.
6. The angle range of handle tilt must be within 60.5 degree (up and down),
please do not shake it in use.
7. Please clean the dirty water tank after each use of cleaning.
Important tips:
• Please
DO NOT
run over the edges of the rugs.
• The dirty Water Tank must be cleaned as soon as the cleaning work
finished to prevent dirty scents.
• DO NOT
turn the main body over before cleaning the dirty water tank,
or the dirty water will flow into the vacuum motor and damage cleaner.
• Please clean and dry the HEPA and Filter after each use.
Important tips:
• Please choose the hard roller brush for areas with a short rug.
• Please
DO NOT
use cleaner across LONG rug areas.
• Please
DO NOT
use cleaner across delicate rugs, silk, or similar floors.
• Please
DO NOT
SPRAY on the rugs.
Summary of Contents for DIRT MASTER CROSS OVER
Page 2: ......
