1. The cleaning water tank is located on the back of the main body. Grasp the
top of the water tank with your fingers and pull it upwards to remove it.
(Fig. 1)
2. Unscrew the water cap counter-clockwise as below and add some water,
then screw it and insert the clean water tank into the cleaner.
(Fig. 2)
Important tips:
• Do not tighten the cover too tightly or too loosely, otherwise the cover
may be damaged or the water tank may leak.
• The user can also add some non-corrosive or flammable liquid cleaning
solutions to clean the floor, do not add dirty water to the cleaning water tank.
• It is normal if there is water in the water tank at the first use, tests
and inspections are proceeded before products leave the factory.
Fig. 1
Fig. 2
Summary of Contents for DIRT MASTER CROSS OVER
Page 2: ......
