VI-038
3” Wide Plywood Strip
Approx.
1/4”
3/4”
8. Attach the sink with clips and screws. Loosely tighten the
screws.
9. If mounting the bowl with an undermount overlap, bowl
should be positioned, as shown.
10. If mounting the bowl with an undermount reveal, bowl
should be positioned, as shown.
11. Verify bowl is in correct position and has not shifted, then
completely tighten screws. Do not overtighten.
12. Use a soft cloth with mineral spirits to remove any excess
silicone.
13. Check for a consistent seal of silicone around inside
perimeter of bowl and countertop. Add silicone if necessary
.
14. Connect the faucet supply lines per the manufacturer’s
instructions.
15. Connect the drain lines and p-trap per the manufacturer’s
instructions.
Note:
Swanstone recommends using a licensed plumber
for the installation of all necessary plumbing.
16. Apply sealant to the bottom side of the sink ring.
Note:
When installing the sink ring and tail pipe, use
plumber’s putty sparingly and do not allow it to
contact the plastic overflow assembly under the sink.
Swan 12 800-325-7008
Installation Procedure
VI-037
VI-039
3” Wide Plywood Strip
Approx.
1/4”
3/4”
VI-011
VI-010
Apply Plumber’s
Putty
Here
VI-050
Summary of Contents for Chesapeake CH1B-2225
Page 16: ...Swan 16 800 325 7008 ...
Page 17: ...800 325 7008 17 Swan ...