Swann BT-3060 L Installation Manual Download Page 4

IMPORTANT NOTICE:  Indicates that equipment or
property damage can result if instructions are not
followed.

Read and Understand the Manual

It is the responsibility of any individual who
installs or maintains this product to fully
understand and follow proper installation and

maintenance procedures.  Be aware of the inherent
dangers in the use of power tools when installing this
product.  Read and understand all Warnings, Cautions,
and Important Notices in this manual.

Work Safely

DO NOT proceed if any doubt arises about the
correct or safe method of performing anything
found in this or other Swanstone manuals.

The installation of this product can require using power
tools.  Do not use power tools without adequate training.
If necessary, hire or consult a trained professional for
expert assistance before continuing.

Use Proper Tools

Always use proper tools which are in good,
working condition during the installation of the
Swanstone products.  Using tools other than

those listed could adversely affect the integrity of floors,
pipes, walls, or this product and could result in water
damage or other damage to floors, pipes, walls, or other
portions of your building or home.

Do Not Use Nails

To prevent damage to the bathtub and
possible water or other damage to floors,
pipes, walls, or other portions of your building

or home, do not nail or screw 

through

the bathtub

flange to secure it to the stud wall.  Bathtub clips
(included) must be used to secure the bathtub in place.
Refer to the specific instructions in this manual for the
proper installation of the bathtub clips.

Inspect Before Cutting

Make sure no electrical wiring or plumbing is
present before cutting into a wall to install any

accessories.

CAUTION:  Indicates a potentially hazardous
situation which, if not avoided, may result in minor or
moderate injury.  It may also be used to alert against
unsafe practices.

Lifting Hazard

According to the National Institute for
Occupational Safety and Health, the
recommended maximum safe lifting weight is

51 pounds, with all lifting conditions perfect—minimal
forward reach, steady load close to the body, straight
back, load between knees and shoulders, and good
grips.  To avoid personal injury, always use these proper
lifting techniques and use two people to move heavy
cartons.  Use the appropriate lifting devices to move the
load.  Always use two people when lifting heavy or bulky
cartons.  DO NOT attempt to lift objects that are too
heavy.

WHEN CARRYING A HEAVY LOAD—GET HELP!

Slipping Hazard

Do not install this product in the presence of
water.  Installing this product without drying all
surfaces, or in the presence of water, could

cause you to slip and fall due to wet floors or spilled
fluids.  Personal injury can result from slips or falls.
Before installation, dry all surfaces, including the floor,
with a cloth or paper towel.  Clean up all water or spilled
fluids immediately.

Tripping Hazard

Personal injury can result from tripping over
power cords, tools, or other items.  DO NOT
leave items laying around the work area.

Personal Protection

Be sure to use all personal
protective equipment, such as sturdy
work boots (preferably with steel

toes), gloves, and hard hat, if necessary, to ensure your
own safety.  To prevent possible damage to your
hearing, always wear ear protection, such as earmuffs or
earplugs, when working around power tools.

Cutting Hazard

The installation of the Swanstone product may
require using power tools.  Keep hands away
from the cutting edge of any tool used in the

installation of our product.  Placing fingers in or around
the cutting blades could result in serious personal injury.

CAUTION

IMPORTANT NOTICE

The Swan Corporation – Swanstone

4

800-325-7008

Safety Guidelines

Summary of Contents for BT-3060 L

















Reviews: