61
Setting up Cruise Mode
To setup CRUISE MODE, you’ll need to define “POINTS”
for each channel with a PTZ camera you want to
“cruise”. A POINT is one place that the camera needs to
move to on its loop.
•
Move the camera to the desired position using the
arrows.
•
Hit the
button.
•
The point will be saved. Its name will be one digit
higher than the previous point.
•
For easy cruise setup, define your points in the same
order as you want the camera to move through
them.
The
button will take the camera back to a pre-
defined point. The
button will remove all your de-
fined points.
When you’ve set your points, select
then
.
•
To start cruise mode, select START CRUISE from the
pop-up menu.
•
To stop cruise mode, select STOP CRUISE from the
same menu.
Remember:
Before Cruise Mode will work, you’ll need
to have enabled the PTZ Configuration menu. See
page
46
.
9.
SELECTED PRESET POINT:
The current preset point being defined/edited.
10.
STOP TIME:
How long the camera will pause at each preset point when using
CRUISE MODE.
11.
GOTO:
Moves the camera to the selected preset point.
12.
DEFINE:
Saves the current position of the camera as a preset point.
13.
ERASE:
Deletes the selected preset point.
14.
SAVE:
Saves changes.
15.
EXIT:
Leaves the PTZ SETUP menu.
