manualshive.com logo in svg

Swann 8600 Series, User Manual

Share
Download
Swann 8600 Series User Manual Download Page 8

Digital Video Recorder User Manual 

1

 

CHAPTER 1

 

Introduction 

NOTICE: The default login is “admin” and the default password is “123456”, Swann recommends 
changing the default password for security purposes as shown on pp19-21 

 

1.1 DVR Introduction 

This DVR adopts high performance video processing chips and embedded Linux system. It utilizes many most advanced 
technologies, such as standard H.264 with low bit rate, Dual stream, SATA interface, VGA output mouse supported, IE 
browser supported with full remote control, mobile view(by phones), etc. it has very powerful functions and high stability. It 
can be widely used in bank, telecommunication, transportation, factories, warehouse, irrigation, etc. 

1.2 Main Features 

COMPRESSION FORMAT

 

•

 

Standard H.264 compression with low bit rate.   

LIVE SURVEILLANCE 

•

 

Support VGA output 

•

 

Support channel security by hiding live display   

•

 

Display the local record state and basic information   

•

 

Support USB or PS/2 mouse to make full control 

 

Summary of Contents for 8600 Series


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands