manualshive.com logo in svg

Swann 8600 Series, User Manual

Share
Download
Swann 8600 Series User Manual Download Page 73

Digital Video Recorder User Manual 

66 

 

Fig 5.1 Disk Manager 

STEP2 

If a disk has never been formatted, Status will show “new”. Select hard disks, press Format button to begin. 

STEP3 

A security window will remind user that this will delete all data on HDD. Press OK to continue. A process will 

display on the screen as below. 

 

STEP4 

It will return to the previous automatically after finished. And status will show “normal” after formatted. 

  Notice: All recorded files will be lost after formatted.

 

5.2 Update Firmware 

Now it only supports USB update. Get the firmware from your dealer, and Make sure the firmware is corresponding with 
the DVR. Users can check USB information in disk manager, please refer to Fig 5.1 Disk Manager. 

STEP1 

Plug an USB flash to the computer. Copy the firmware to the flash. The extension of firmware is tar. 

Summary of Contents for 8600 Series


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands