SWAGTRON
TM
SWAGDRONE
TM
150-UP Racing Quadcopter Quick Start Guide
16
11.0 GA005 Balance Charger
Parameters
Features
1. The GA005 utilizes microcomputer chips to monitor and control the charging process
in a balanced way with LED indicators that display the charging status in real time.
2. Connects to an input power supply (DC 15-18V 1000 mA).
3. GA005 is suitable for 7.4V/ 11.1V Li-ion or Li-polymer battery pack.
4. The GA005 can detect the Li-Po battery automatically. The GA005 will automatically
charge when it finds the voltage of a single cell battery is excessively low. At the same
time, the LED displays the charging status by flashing red. Control the single cell
battery voltage with a range of 4.2 +/- 0.5V to ensure the maximum voltage difference
of a single celll is less than 50 mV.
Instructions
*
The GA005 can only be used to charge a 2S or 3S Li-On or LI-Polymer battery. It is
forbidden for you to simultaneously charge two or more sets of batteries. Either the
charger or battery may be damaged.
*
While charging, the GA005 should be placed in a dry and well ventilated place and be
placed far away from heat sources and flammable and explosive substances.
*
The battery should be removed from the helicopter when charging. In order to avoid the
risk of accidents, never leave the charger unsupervised during the charging process.
*
DO NOT CHARGE YOUR BATTERY IMMEDIATELY AFTER ITS FLIGHT IS FINISHED, OR THE
TEMPERATURE HAS NOT FINISHED FULLY COOLING. OTHERWISE THE BATTERY WILL RISK
COMBUSTING.
*
ENSURE THAT THE BATTERIES ARE AT THE CORRECT POLARITY BEFORE CHARGING.
*
Avoid dropping or roughly handling the battery during the process of charging. Dropping
1000mA
DC15-18V
800mA
62.5 x 47 x 20.8mm
46g
Input Voltage
Input Current
Output Current
Dimension
Weight
12.6V 8 . 4 V 4 . 2 V 0V
NOTE:
1. Before charging, please read the instructions;
2. For indoor use only and forbidden to expose to rain;
3.
Warning:
against recharging the non-rechargeable
batteries.
Status
LED
Polarity Assignment
Diagram
Charging jack for 7.4V battery
Status LED
Input Jack
Charging jack for 11.1V battery
