www.swstahl.de
SW-Stahl GmbH
An der Hasenjagd 3
D-42897 Remscheid
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
E-Mail: [email protected]
BEDIEUNUNGSANLEITUNG
/ INSTRUCTION
MANUAL
20720L
3. Put on the jack so that the unit is parallel to the side of the tire you wish to lift. Leave some
space between tire and jack. This is very important, because in the case of a poorly positioned
jack, the tire might press against the jack’s axle and not against it rolls, which might cause
damage to the jack.
4. To lit the tire, put one foot on the pedal and push it gently and steadily downwards until the tire
has been lifted off the ground a couple of centimeters. The jack has a firmer stand as lower the
lifting height of the tire actually is. Repeat the procedure with the other units and move the lifted
vehicle as desired.
5. To release the jack, pull the jack’s locking bolt out of its frame and open the release mechanism
by turning the handwheel counter-clockwise. The jack can be removed as soon as the tire loses
contact with the jack’s rolls.