www.swstahl.de
SW-Stahl GmbH
An der Hasenjagd 3
D-42897 Remscheid
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
E-Mail: [email protected]
BEDIEUNUNGSANLEITUNG
/ INSTRUCTION
MANUAL
01424L
To assemble the unit for brake bleeding
a.: Attach one of the 3” pipe lengths to the
hand pump and to the reservoir lid
b.: Attach another 3” pipe to the bottom of
the cap
c.: Attach the 24” pipe length to the free
reservoir lid port
d.: Select and appropriate adapter and
attaché to the reservoir hose
e.: Attach the adaptor to the bleed nipple
f. Place a wrench on the brake
bleeding fitting but do not turn
g.: Ensuring that the mode selector is in
the “IN” position, pump around 15-20
times to build up a vacuum in the pump
system
h.: Open the fitting unit the fluid starts to
enter the reservoir jar
i.: Remove approx 2oz of fluid and then
tighten the fitting
j.: Repeat on remaining wheels
