SVT innovations SVT-2 PC6, User Manual

Page: 16 / 20

-13-
-1 4 -
Each indoor monitor should be assigned with an address in the system.
SVT-2 Outdoor Station B (2W12120): A maximum of 16 indoor monitors can be connected to the
system. Program the indoor monitors with user codes 0 - 15.
Input No. User Code Input No. User Code Input No. User Code
8200 Code=0 8211 Code=11 8222 Code=22
8201 Code=1 8212 Code=12 8223 Code=23
8202 Code=2 8213 Code=13 8224 Code=24
8203 Code=3 8214 Code=14 8225 Code=25
8204 Code=4 8215 Code=15 8226 Code=26
8205 Code=5 8216 Code=16 8227 Code=27
8206 Code=6 8217 Code=17 8228 Code=28
8207 Code=7 8218 Code=18 8229 Code=29
8208 Code=8 8219 Code=19 8230 Code=30
8209 Code=9 8220 Code=20 8231 Code=31
8210 Code=10 8221 Code=21
*For additional settings, refer to the Indoor Monitor User Manual.
6.2 DIP Switches Settings of Indoor Monitor
There are 3 DIP switches in total. Bits 1 and 2 are reserved and must be on the default position.
The Bit 3 is used to configure the position of each indoor monitor in the connection line. It must be set
to ON if the indoor monitor is in the end of the line, parallel connection, or connected to a SVT-2
DBC-4 module. It must be set to OFF if the indoor monitor is in the middle of the line (daisy chain
connection)
1 2 3
ON
Bit
DIP1&2
Reserved. left to default.
Set to OFF. When the monitor is in the middle of the line in daisy chain connection.
Bit State Description
DIP3
1 2 3
ON
1 2 3
ON
Set to ON. When the montior is at the end of the line or connected to a SVT-DBC4.